Introduction

This guide will explain how to install the cable attachment bracket for the PAX A80 terminal (part number AZP-310006) designed to prevent the accidental disconnection of cables from the terminal.

Important Icon

IMPORTANT! This cable attachment bracket is only for use with PAX A80 terminals used in countertop environments. It is not compatible with the A80 extension pole for drive-through applications.

The topics covered in this guide include:

Preparing the Terminal

Before you can install the cable attachment to the PAX A80 terminal, you must prepare the terminal by doing the following:

  1. Power off the terminal by pressing and holding the red X key on the physical keypad. 
    A80 power button
  2. Turn the terminal over and remove all cables from the terminal's communication ports.
    A80 back no cables

 

 


Copyright © 2022 PayFacto Inc.