SecureTable Application Configuration

IP / URL toggle switch

By default, the toggle switch is set to IP, and the field is labeled STPI IP Address. By touching the toggle switch, the field will change to STPI URL Address.

• The IP option is used to locate the STPISecure Client using an IP address, such as 192.168.xxx.xxx.
• The URL option is used to locate the STPISecure Client using a Uniform Rersource Locator (URL), such as https://payfacto.com/.

STPI IP/URL Address for WiFi

Enter the IP address or URL of the PC or resource where the STPI Client is installed and running, when accessing it through the local WiFi network.

Find STPI

After entering the IP address or URL, touch this link to verify the communication between your payment terminal and the STPI Client.

Redundant Network

Enable this option to allow the SecureTable application to communicate over both WiFi and 4G/LTE mobile networks. By default, SecureTable will always try to use WiFi networks first, to avoid extra costs from using data over mobile networks. If the terminal is out of range of any known WiFi networks, SecureTable will automatically switch to 4G/LTE mobile network. Enabling this option will also unlock additional settings.

NOTE: A SIM card needs to be installed in the payment terminal to get access to 4G/LTE mobile networks. Also, this option will be hidden if no SIM card is detected.

Auto-connect to LTE

** This settings is only visible if Redundant Network is also enabled.

With this option enabled, SecureTable will offer the option to automatically switch from WiFi to 4G/LTE if unable to reach the POS system during a transaction. This switch will only happen if the application is actively trying to connect to the POS system. It will not happen while the application is idle.

If this option is disabled and there is a WiFi communication issue during a transaction, you will get a generic error message and you will need to manually switch to 4G/LTE and re-attempt the transaction.

STPI IP/URL Address for LTE

** This settings is only visible if Redundant Network is also enabled.

Enter the Public IP addressA public IP address is a globally routable unicast IP address, meaning that the address is not an address reserved for use in private networks. Public IP addresses may be used for communication between hosts on the global Internet. In a home or small business situation, a public IP address is the IP address assigned to the home or business network by the Internet Service Provider (ISP). In this case, it is also locally visible by logging into the router configuration. or URL to access the STPI Client is installed and running, when accessing it through the 4G/LTE mobile network.

Find STPI

After entering the IP address or URL, touch this link to verify the communication between your payment terminal and the STPI Client.

NOTE: The STPI Client needs to be up-and-running. If you are using FIND STPI for 4G/LTE, Port Forwarding also needs to be configured on the router/firewall controlling the access to the local area network.

STPI Port Number

This field displays the current TCP port number used for communication with the STPI Client.

NOTE: This setting can only be modified from the Advanced Settings screen and is displayed here for information purposes only.

STPI Port Number

Default: 9999

This is the TCP port number used by STPI. Be sure that this TCP port is unblocked by your network administrator.

POS Type

• Select 1 for Maitre’D, Veloce or any POS other than Micros or Squirrel.
• Select 2 for Micros.
• Select 3 for Squirrel.

Setting Password

Configure the password used to access settings. This is also the password that will be requested if the customer enters a tip amount that exceeds the Tip Threshold.

Enable Search by Table Number

Enable this option to have the terminal prompt the server for a table number. This allows the SecureTable application to search for all available checks for a given table number.

Enable Search by Check Number

Enable this option to have the terminal prompt for a check number. This allows servers to enter a check number in order to directly access a check, instead of selecting the check from a list.

More Settings

Touch this link to view more advanced settings.

SAVE

Touch this button to save your changes and return to the home screen.

Configure More Advanced Settings

Cash

Enable this option to allow cash payments to be applied on checks from the SecureTable application.

Delivery

Enable this option to use the SecureTable application in Delivery mode. With this option enabled, the payment terminal will display the delivery order numbers instead of table numbers.