Installing the SIM Card
If you plan to use your terminal outside of your usual wi-fi network, you need to install the mobile SIM card, provided by PayFacto or your mobile communications provider. The SIM card will connect you to a mobile network, allowing you to process payments anywhere the terminal has reception. Mobile network access can also serve as a backup connection if your wi-fi network reception is unreliable in certain areas. The terminal uses the micro-SIM card size.
NOTE: If you plan to use your terminal only on your wi-fi network, you can skip this procedure and proceed directly to Configuring the Terminal Wi-Fi Connection.
To install the mobile SIM card:
- Make sure the terminal is powered off and turn the terminal over.
- On the back of the terminal at the bottom left corner, there is a notch you can slide a coin or fingernail into to lift the battery cover.
- Lift the battery cover off the terminal.
- Lift the battery from the terminal to remove and set aside.
- The terminal has illustrations for the different cards it can accept. Insert your SIM card in the space identified as SIM1 so the diagonal corner is facing the top left side.
IMPORTANT! The SIM card does not require much force to insert.
- Re-install the battery and push on the bottom of the battery to seat it correctly.
- Re-install the battery cover on the terminal and push down to secure it and turn the terminal over.
- Power on the terminal by pressing and holding the Power button for 3 seconds.
The terminal should identify the SIM card and configure the mobile network settings automatically.
