Replacing the Printer Paper

The terminal uses 2 ¼” or 58mm thermal paper rolls to print transaction receipts.

To replace the printer paper:

1. On the back of the terminal at the top, lift the lever with the contactless logo to unlock and open the printer cover.
   
   

        

   NOTE: The printer cover opens on a hinge, it does not come off the terminal.  

2. Place the roll of printer paper in the paper tray, leaving about 2 inches (5 cm) of paper beyond the printer's cutter as shown in the following example: 
   
   

   IMPORTANT! Make sure the paper unrolls from the back of the roll, otherwise the printer will be unable to print the transaction receipt.  

3. Close the printer cover until it snaps into place and remove any excess paper.