Installing the SIM Card

If you plan to use your terminal outside of your usual wi-fi network, you need to install the mobile SIM card, provided by PayFacto or your mobile communications provider. The SIM card will connect you to a mobile network, allowing you to process payments anywhere the terminal has reception. The terminal uses the regular (full) SIM card size.

NOTE: If you plan to use your terminal only on your wi-fi network, you can skip this procedure and proceed directly to Configuring the Terminal Wi-Fi Connection.

To install the mobile SIM card:

1. Make sure the terminal is powered off and turn the terminal over.
2. On the back of the terminal press the tab to unlock the cover and lift the cover from the terminal.
3. Use the tab to lift the battery from the terminal to provide additional space to work. You do not need to unplug the battery, but you can if you want additional space to work.
4. The terminal has illustrations for the different cards it can accept. Insert your SIM card in the space identified as SIM so the diagonal corner is facing the top left side.
   
   

   IMPORTANT! The SIM card should not require much force to insert.  

5. Re-install the battery (if you unplugged the battery, remember to reinsert and seat the battery connector in the port) and the cover on the terminal until it snaps closed.
6. Power on the terminal by pressing and holding the Power button for 3 seconds.

The terminal should identify the SIM card and configure the mobile network settings automatically.

Copyright © 2022 PayFacto Inc.