System Configuration Setup

In the Veloce Setup / Utilities module, some Modern workstation settings need to be setup:

1. Login to the Veloce Back-Office

   

2. Open the Setup/Utilities module

   

3. Click the System Config. link. (or use the Configuration > System Configuration... menu option)

   

4. Click on the Misc. tab. The Modern workstation options are located at the bottom of that page.

   

   Modern Workstation

   Username

   Activate the checkbox, then type the username you wish to use to connect the workstation running on the payment terminal to the veloce back-office.

   Password

   Type the password you wish to use along with the username created above.

   Connection managed on the server (port)

   Activate the checkbox and type the TCP port number to be used for communication between the payment terminal and the Veloce Back-office server. The default is 40000.

   Data saver for PATD

   Enable this option if Pay-At-The-Door functionalities are used.

5. Click the Save button to save the new settings and close this window.

This completes the setup required in the System Configuration module. If all the other configuration steps are completed, now would be a good time to stop the Veloce server, create workstation data and restart the Veloce server.